Capatect Reinforcement Mesh (105 gr/m2 )


  • Weight: 105 gr/m2 ± 5% DIN 53 854s
  • Strength: min. 25 N/mm (warp and weft) DIN EN ISO 13934-1
  • Remaining strength after alkali test min. 50% (28 days for NaOH of 5%)
  • Conforms TS EN 13496.


Capatect Glass-Fiber Mesh (105 gr/m2) is pushed with trowel before Capatect Acrylic Thermal Insulation Plaster gets dry so that it overlaps 10 cm at joints and in such a position that it will be close to the exterior surface and plaster surface is smoothed. Window and door corners are supported with special cross glass-fiber mesh. Corner and window profiles are mounted. Mesh should not be seen from outside after it is applied. Then, complete the system with paint and top coat coating.
Capatect Thermal Insulation Products