Dilatation Profile (PVC)

CAPATECT DILATATION PROFILE WITH MESH (PVC) 2.5 m

Dilatation profiles with special PVC mesh of 2.5 m length which are used on surface mounted, horizontal and vertical joints.
Performs tolerance for deplacements up to 3 cm.
Two models are available as 180° for exterior surfaces and 90° for interior corners.
Packaging: 25 pieces - 68.35 yd

APPLICATION

Capatect corner profiles should be placed on insulation plates with mesh such that they come in contact with the whole surface. If PVC corner profile with mesh is used, mesh of the profile and the mesh used on the surface should be put over each other; if aluminium corner profile is used, the glass-fiber mesh on the surface should be applied such that it completely turns the corner under the profile. 6 Capatect Dilatation Profile is applied with Capatect Thermal Insulation Plaster. Dilatation gasket at the center of the profile should be adjusted such that it will absorb the movement which may occur in both directions (shrinking-expansion).

Capatect Windowsill Extension Profile is applied between windowsill and plate when thermal insulation plates are being adhered. Capatect Sealing Tape and Capa-Mastic products should be used around the window and windowsill in order to prevent water seeping in.