Organic Thermal Insulation Plaster

Acrylic based, ready-to-use thermal insulation plaster with characteristics of superior resistance against impact and water repellency used for surface correction of thermal and sound insulation materials such as polystyrene based and mineralwool boards as well as paints and plasters in a self-supporting condition.


•Superior Resistance Against Impact
• High elongation at break
• Superior tensile strength
• Ready-to-use
• Low amount of loss owing to reuse of the excess materials
• Water repellency
• Elasticity
• Superior operating and application


After a minimum of 24 hours, fix the completed thermal and sound insulation materials, such as polystyrene based and mineralwool plates adhering works with wall plugs. Mount the profiles on proper areas especially on the corners of building and corners of spaces such as windows and doors and on fugas. Apply Capatect Organic Thermal Insulation Plaster on 2.5-3.0 mm thick thermal insulation boards with an 8x8 toothed steel trowel. Push the alkali resistant glass-fiber mesh (105 g/m2) through approximately 1 mm with a trowel so that it is close to the exterior surface before the plaster gets dry so that it overlaps 10 cm and the plaster surface is smoothed. Window and door corners are supported with cross glass-fiber mesh. During application and drying period, ambient and surface temperatures should be between +5°C and +30?. Do not carry out this application in direct sunlight, in the rain or in strong winds. Surface should be protected against freezing before setting time of product is up. Application should be protected against rain and wetting due to various reasons until drying time is completely finished. Clean the tools you have used with water soon after application.
Capatect Thermal Insulation Products