Organic Thermal Insulation Adhesive

Acrylic based, ready-to-use thermal insulation adhesive with characteristics of superior adhesion and water repellency used for safe adhesion of thermal and sound insulation materials such as polystyrene based and mineralwool boards on wood and prefabricated surfaces ideally.


• High adsorption strength
• Ready-to-use
• Low loss owing to reuse of the excess materials
• Water repellency
• Elasticity


After a minimum of 24 hours, fix the completed thermal and sound insulation materials, such as polystyrene based and mineralwool boards adhering works with dowels. Mount the profiles on proper areas especially on the corners of building and corners of spaces such as windows and doors and on fugas. Apply Capatect Organic Thermal Insulation Plaster on 2.5-3.0 mm thick thermal insulation boards with an 8x8 toothed steel trowel. Push the alkali resistant glass-fiber mesh (105 g/m2) through approximately 1 mm with a trowel so that it is close to the exterior surface before the plaster gets dry so that it overlaps 10 cm and the plaster surface is smoothed. Window and door corners are supported with cross glass-fiber mesh. During application and drying period, ambient and surface temperature should be between +5°C and +30?. Do not carry out this application in direct sunlight, in the rain or in strong winds. Surface should be protected against freezing before setting time of product is up. Application should be protected against rain and wetting due to various reasons until drying time is completely finished. Clean the tools you have used with water soon after application.
Capatect Thermal Insulation Products
Hizmetlerinize, kampanyalarınıza, ürünlerinize ve yeniliklerinize yönelik bilgilendirmelerin yapılması amacıyla bildirdiğim e-posta adresime
BETEK BOYA VE KİMYA SAN A.Ş. tarafından e-posta ve bülten gönderilmesini

Please enter a valid email address.